WH BC Fixed Jaw Super Clamp

Manufactured in accordance with BS EN13155: 2003 + A2: 2009

* Picture for reference only

• The WH BC fixed jaw super clamp is fitted with a ‘gussett’ in both jaws maximising contact between the beam and clamp thus increasing the grip. A shackle is fitted to the bottom allowing an easy connection of the hoist to be attached.
• WLL capacity 2.0 tonnes
• The working load limits and derations have been established specifically for most William Hackett clamps and only apply in overhead beam attachment i.e: DO NOT apply if clamps are to be used for lifting beams.

We strongly advise that stress calculations should be carried out (by the user’s engineering department) for all support steelwork.

WARNING: All clamps must be correctly applied to the beam by a competent person and fully hand tightened.

NOTE: This clamp model is not suitable for any side loading as it is of lightweight design.